Biology HL's Sample Internal Assessment

Biology HL's Sample Internal Assessment

Effect of concentration of enzyme (pectinase) on volume of juice extracted from red & green apples

6/7
6/7
20 mins read
20 mins read
Candidate Name: N/A
Candidate Number: N/A
Session: N/A
Word count: 3,851

Table of content

Research question

Does the volume of juice extracted from red and green apples using the enzyme pectinase depends on the concentration of pectinase used, determined using volumetric analysis?

Rationale

Application of biology in food industry and other food processing process is one of the most upcoming research topic. Use of enzymes in extracting juice from food samples is something, I studied in Molecular Biology and found really interesting. During my visit to a wine factory during one of our trips, I came to know the actual use of pectinase to process wine and make it clear by removing pectin from the wine. The questions that still bothered me was why are the manufacturers so particular about maintaining specific physical conditions like temperature, pH and concentrations of enzymes during this process. I came to know from my DP Biology classes that the action or catalytic ability of enzymes depends on physical conditions like temperature, pH and even concentration of both the substrate and the enzyme. I chose this field as a topic of investigation for my Biology Internal Assessment and arrived at the research question stated above.

Background information

Enzymes-the biological catalyst

Enzymes are macromolecular, globular proteins that act as biological catalysts in chemical reactions without having to be a part of the reaction and lower the activation energy when the enzyme and substrate bind. They are folded and form a pocket which serves as an active site in order to allow a substrate to bind which results in a reaction. The shape of the active site is complementary to that of the substrate and forms a lock and key structure which creates specificity for the enzyme. Since enzymes and substrates are in a continuous state of motion, they collide where the substrate binds to the active site of the enzyme creating an enzyme substrate complex. When substrates are inside the active site, the products formed are as a result of catabolism, which is the breaking of bonds or anabolism, which is the formation of bonds. After the reaction takes place, the products are released. In this experiment, the enzyme used is pectinase with the substrate being pectin.

Figure 1 - Figure-Schematic Representation Of Working Of Enzyme

Factors that affects enzyme activity

There are several factors that affect the rate of enzymatic activity namely concentration between enzymes and their substrates, temperature and pH2 . This experiment will investigate the effect of different concentrations of pectinase on the production of fruit juice in red apples and green apples. As the enzyme concentration decreases, the rate of reaction will also decrease since there are not enough enzymes for substrates to bind to which inhibits a reaction to take place causing a decrease in enzymatic activity whereas when enzyme concentration increases, there will be more enzymes which will allow more substrates to bind to creating a higher number of reactions thus, increasing enzymatic activity.

Figure 2 - Rate Of Reaction Versus Concentration Of Enzyme

Role of pectinase

Pectinase is an enzyme which break down pectin, a hetero polysaccharide present in the cell walls4 of fruits such as oranges and apples, and keeps the cell walls firm and rigid. As the enzyme breaks down the soluble pectin, the amylases take off starch from the juice which causes haze in the juice. Pectin gets broken down from polymers to monomers by the process of hydrolysis which are water-soluble, for example: breaking of glycosidic bonds between galacturonic acid. Pectinase is industrially used to extract juice from fruits by breaking through the cell walls, especially apples. Pectinase is found to show an optimum pH ranging from 3.5 to 9.12 and a range of temperature from 50.0oC to 90.0oC depending on the source of pectinase used5

Hypothesis

  •  “Enzymes.” Chemistry for Biologists: Enzymes, www.rsc.org/Education/Teachers/Resources/cfb/enzymes.htm. Accessed on July10, 2019 1.30 pm
  • “The Effect of Substrate Concentration on Enzyme Activity.” Untitled Document, www.ucl.ac.uk/~ucbcdab/enzass/substrate.htm. Accessed on July15,2019 1.12 am
  • Heena Verma1, Lokesh K Narnoliya2 and Jyoti Singh Jadaun. “Pectinase: A Useful Tool in Fruit Processing Industries.” Nutrition and Food Science , 7 Mar. 2018, doi:10.19080/NFSIJ.2018.05.555673. Accessed on August 12, 2019 7.30 am
  • Vinod Joshi, et al. “Purification, Characterization of Pectinase Produced from Apple Pomace and Its Evaluation in the Fruit Juice Extraction and Clarification.” Accessed on July 21, 2019 11.45 am

Null hypothesis

There is no correlation between the volume of juice extracted from the red and green apples and the concentration of pectinase used for it. Any correlation observed is an outcome of an experimental error or by random chance.

Alternate hypothesis

There is a positive correlation between the volume of juice extracted from red and green apples and the concentration of pectinase used. The literature review (refer to Figure-2) supports this hypothesis.

Independent variable

The percentage concentration of pectinase used is the independent variable in this investigation. The pectinase solutions were prepared by dissolving pectinase (solid) in distilled water. The concentration has been measured in terms of mass percentage (mass of solute per 100 cm3 of the solvent). The solutions of pectinase used are – 10 %, 20 %, 30 %, 40 % and 50 % respectively. Digital mass balance was used to weigh the solid and the solutions were prepared in 100 cm3 volumetric flask.

 

The type of sample can also be considered as an independent variable for this investigation as two different varieties of apples were used – red apple and green apple.

Dependent variable

The volume of clear juice obtained from the mesh of the fruits after adding pectinase to it is the dependent variable of this investigation. The volume was measured using a graduated measuring cylinder. Data were reported at a confidence level of ± 0.5 cm3.

Controlled variables

  • Temperature of samples
    - The extraction of juice is an enzyme catalysed reaction. The rate and yield of this process depends on the temperature at which it is carried out. The temperature was maintained constant at 60.00C as the optimum temperature of pectinase ranges from 50.0 0C to 90.0oC A water bath was used for this purpose.
  • Volume of water
    For a fair comparison, the volume of pectinase solution added to the sample must also be kept constant. 50.0 cm3 of pectinase solution was added in all trials using a graduated measuring cylinder.
  • Time
    The volume of juice extracted depends on the duration for which the pectin in the mesh of the fruit samples are in contact with the enzyme. Longer the duration, more the volume of juice extracted from it (until all the enzyme has been used up). Thus, the time was kept constant at 20 minutes for each trials and monitored using a stop-watch.
  • Concentration of substrate
    Rate of enzyme catalysed reactions depends on the concentration of substrate used. In this investigation, the fruit sample is the substrate and thus the quantity of substrate used was kept constant at 5.00 g in all trials using a digital mass balance.

ApparatusQuantityLeast countUncertainty
Digital mass balance10.01 g±0.01 g
Graduated measuring cylinder-100

cm3

1

1.0 cm3

±0.5 cm3

Spatula1NANA
Watch glass1NANA
100

cm3

volumetric flask
5100.00

cm3

±50 cm3

Knife1NANA
Mixer grinder1NANA
Stop-watch10.01 s±0.01 s
Thermometer1

1.0oC

±0.5 oC

100

cm3

glass beaker
5

20 cm3

± 10 cm3

Water bath1NANA
Syringes – 10

cm3

1NANA
Filter papers1 boxNANA
Glass funnel1NANA
10

cm3

graduated pipette
1

0.10 cm3

±0.05 cm3

Figure 3 - Table On List Of Apparatus Required

Figure 4 - List Of Materials Required

Methodology

Volume % of solutionVolume of pectinase solution added / ±0.50

cm 3

Volume of distilled water in

cm3

0.000.00100.00 (Controlled)
10.0010.0090.00
20.0020.0080.00
30.0030.0070.00
40.0040.0060.00
50.0050.0050.00

Figure 5 - Table On Preparation Of Pectinase Solution

The required volume of pectinase was was transferred to a 100 cm3 clean and dry volumetric flask and distilled water was added to it using a graduated measuring cylinder.

Determination of volume of juice obtained

  • 2 red apples were taken and cut them into fine pieces using a knife.
  • The cut pieces were put into a blender
  • The blender was started and stopped when puree was formed.
  •  5.00 ± 0.01 g of the puree was weighed using a spatula, watch glass and a digital mass balance.
  •  The weighed puree was transferred to a 100 cm3 glass beaker using a spatula.
  •  75.00 cm3 of 0.00% pectinase solution (controlled) was added to it using a 100.0cm3 graduated measuring cylinder.
  •  The beaker was placed on the water bath and the temperature of the water bath was set at 60.0oC The beaker was placed there for 20.00 ± 0.01 minutes and the time was monitored using a stop-watch.
  •  The content of the beaker was then filtered using a filter paper and a funnel and the filtrate was collected in a 100.0 cm3 graduated measuring cylinder.
  •  The volume of the filtrate was noted down.
  •  All of the above steps were repeated for four more times to collect data in five sets.
  •  All of the above steps were repeated for other solutions of 20%, 30%, 40% and 50% solutions of pectinase.
  •  All of the above steps were repeated for green apples.

Qualitative data

  • The apple extract turned red rose in colour on addition of pectinase solution.
  • The colour of the filtrate (juice) collected was different for the different strengths of pectinase solution. The colour was pale yellow for 10%, 20% and 30% pectinase solution while golden yellow to brownish yellow for 40% and 50% pectinase solution.
  • The intensity of the colour of the filtrate increases as the mass percentage of the pectinase solution added was increased.

Quantitative data

Figure 6 - Table On Raw Data For Volume Of Juice For Red Apples For Various Volume Percentages Of Pectinase Solution

Sample calculation

For 10.00% pectinase solution,

 

Average= \(\frac{16.00+16.00+16.00+17.00+16.00}{5}= 16.20 ± 0.50 \, \,cm^3\)

 

Standard deviation

 

S.D = \(\frac{(16.00-16.20)^2 +(16.00-16.20)^2+(16.00-16.20)^2+(17.00-16.20)^2+(16.00-16.20)^2}{5}= 0.45\)

Figure 7 - Table On Raw Data For Volume Of Juice For Green Apples For Various Volume Percentages Of Pectinase Solution

Data processing

Mass percentage of pectinase solutionAverage volume of juice extracted in ±0.50

cm3

Fractional uncertaintyPercentage uncertainty
0.007.800.066.41
10.0016.200.033.09
20.0051.800.010.97
30.0053.200.010.94
40.0053.800.010.93
50.0054.200.010.92
60.0054.200.066.41

Figure 8 - Table On Volume Of Juice Extracted Against Volume Percentage Of Pectinase Solution For Red Apples